NaN
/
of
-Infinity
🚀 Genuine products, vast inventory, swift shipping!
Siemens 6ES7331-7NF10-0AB0 | Analog Input Module
Siemens 6ES7331-7NF10-0AB0 | Analog Input Module
Technical Specifications:
Manufacturer:
Siemens
Product No.:
6ES7331-7NF10-0AB0
Condition:
In Stock
Product Type:
Analog Input Module
Product Origin:
DE
Weight:
272g
Shipping port:
Xiamen
Warranty:
12 months
Siemens Product Information |
|
|---|---|
| Order Number: | 6ES7331-7NF10-0AB0 |
| Product Description: | Analog input module SM 331; AI 8 x 16 Bit |
Siemens Dimensions and Weight |
|
|---|---|
| Dimensions (W x H x D): | 40 x 125 x 117 mm |
| Weight: | Approx. 272 g |
Siemens Module-Specific Data |
|
|---|---|
| Supports Parameter Reassignment in RUN: | Yes |
| Response of Non-Programmed Inputs: | Return the process value which was valid before configuration |
| Supports Isochronous Mode: | No |
| Number of Inputs: | 8 |
| Cable Length (Shielded, Max.): | 200 m |
Siemens Voltages, Currents, Electrical Potentials |
|
|---|---|
| Rated Electronics Supply Voltage L+: | 24 V DC |
| Reverse Polarity Protection: | Yes |
| Electrical Isolation: | Yes, between channels and backplane bus, channels and electronics power supply, channels (in groups of 2) |
| Isolation Test Voltage: | 500 V AC |
| Current Consumption from Backplane Bus: | Max. 100 mA |
| Current Consumption from Supply Voltage L+: | Max. 200 mA |
| Power Loss of the Module: | Typ. 3.0 W |
Siemens Generation of Analog Values |
|
|---|---|
| Measuring Principle: | Integrating |
| Integration/Conversion Time/Resolution (Per Channel): | Programmable |
| Basic Conversion Time in ms (8-Channel Mode): | 95/83/72/23 ms |
| Basic Conversion Time in ms (4-Channel Mode): | 101) 4) |
| Resolution, Including Sign: | 16 bits |
| Interference Frequency Suppression at Frequency f1 in Hz: | All2)/50/60/400 Hz |
| Measured Value Smoothing: | None / Low / Average / High |
| Basic Execution Time of the Module in ms (8-Channel Mode): | 190/166/144//46 ms |
| Basic Execution Time of the Module in ms (4-Channel Mode): | 101) |
Siemens Interference Frequency Suppression, Error Limits |
|
|---|---|
| Interference Frequency Suppression at F = n x (f1 1%) | (f1 = interference frequency, n = 1, 2, ...) |
| Common Mode Interference (VCM < AC 60 V): | > 100 dB |
| Series Mode Interference (Peak Value of Disturbance < Rated Input Range): | > 90 dB 3) |
| Crosstalk Between Inputs: | > 100 dB |
Siemens Errors/Accuracies |
|
|---|---|
| Operational Limit (Across Entire Temperature Range): | Relative to the measurement range end value in the selected input range: |
| Input Voltage: | ±0.1% |
| Input Current: | ±0.1% |
| Basic Error Limit (Operational Limit at 25 °C): | Relative to the measurement range end value in the selected input range: |
| Voltage Input: | ±0.05% |
| Current Input: | ±0.05% |
| Temperature Error (Relative to Input Range): | ±0.005%/K |
| Linearity Error (Relative to Input Range): | ±0.01% |
| Repeat Accuracy (In Settled State at 25 °C, Relative to Measurement Range End Value in the Input Range): | ±0.01% |
Siemens Status, Interrupts, Diagnostics |
|
|---|---|
| Interrupts: | Hardware interrupt when limit value is exceeded (programmable) Hardware interrupt at end of cycle (programmable) Diagnostic interrupt (programmable) Programmable channels 0 to 7 |
| Diagnostic Functions: | Programmable |
| Group Error Display: | Red LED (SF) |
| Reading Diagnostic Information: | Supported |
Siemens Encoder Selection Data |
|
|---|---|
| Input Range (Rated Values) / Input Impedance: |
Voltage: ± 5 V / 2 MΩ 1 V to 5 V / 2 MΩ ± 10 V / 2 MΩ Current: 0 mA to 20 mA / 250 Ω 4 mA to 20 mA / 250 Ω ± 20 mA / 250 Ω |
| Maximum Voltage at Voltage Input (Destruction Limit): | 35 V continuous; 75 V for max. duration of 1 s (duty factor 1:20) |
| Maximum Current at Current Input (Destruction Limit): | 40 mA |
