1 1

🚀 Genuine products, vast inventory, swift shipping!

PM865K01 3BSE031151R1 ABB Processor Unit HI Module

PM865K01 3BSE031151R1 ABB Processor Unit HI Module

Technical Specifications:

Manufacturer:
ABB
Product No.:
PM865K01
Condition:
In Stock
Product Type:
Processor Unit HI Module
Product Origin:
Switzerland
Weight:
1200g
Shipping port:
Xiamen
Warranty:
12 months

PM865K01 and TP830 Process Units

Main Features

  • MPC862P Microprocessor running at 96 MHz.
  • 32 MB RAM with internal and external battery backup.
  • 12 x S800 I/O Units directly connected to the electrical ModuleBus.
  • 4 Integrated Ports on the main board, including:
    • CN1 + CN2, Ethernet ports (IEEE 802.3, 10BaseT)
    • COM3, serial port (RS-232C) supporting modem functionality
    • COM4, serial port (RS-232C) for service functions
  • Other Communication Protocols achieved through extended communication interface modules.
  • Redundancy Control Link used for redundant schemes.
  • High Safety Integrity Controller (with SM810/SM811 and certified software)
    • Overvoltage protection
    • Internal voltage monitoring
    • Runs non-SIL and SIL 1-3 application codes
    • Supports S800 IO high safety integrity

Basic Technical Data of Process Units

Memory

  • 4 MB flash PROM (stores firmware).
  • 32 MB SDRAM.

Power Consumption

  • 6.9 W typical.
  • 11.9 W typical (including all ModuleBus and CEX Bus power).

Current Consumption

  • 287 mA typical (487 mA maximum) (excluding ModuleBus and CEX-Bus power).

Power Input Terminals

  • 4 poles, screw-tightened terminals, L+, L–, SA, and SB.

Power Requirements

  • Input design L+ and L–, 24 V nominal, fluctuation range between 19.2V DC and 30V DC.
  • Redundant power supply status input: input design SA, SB
    • Maximum input voltage 30 V
    • Minimum high-level input voltage 15 V
    • Maximum low-level input voltage 8 V
    • These inputs are status signal inputs, with thresholds for logical "0" or "1" inputs, not power failure thresholds.

Power Endurance

  • Process units have an internal 5ms power endurance capability, sufficient for the CPU to handle controller power failure faults.

Protection Level

  • IP20 in compliance with EN60529, IEC 529.

Weight

  • 1200 g (2.6 lb)

Dimensions

  • W 119 x H 186 x D 135 mm (4.7 x 7.3 x 5.3 in.)

Battery Technical Parameters

Resource Backup Time

  • Internal battery: minimum 235 hours.
  • External battery SB821: minimum 24 weeks.
  • External battery SB822: minimum 3 weeks when fully charged.

Electromagnetic Compatibility and Electrical Safety

  • PM865K01/TP830 comply with the EMC Directive EMCD 2004/108/EC. Technical specification requirements.

Performance Data

  • The theoretical performance of the PM865K01 control unit in a non-redundant configuration is twice that of the PM860. However, based on actual applications and program optimization, performance data may be slightly lower than the theoretical value. When configured redundantly, execution performance is slightly slower than in a non-redundant configuration.
  • Since the PM865K01 is designed as a high safety integrity controller, when used in process automation applications, performance data is as stated above. When used for high safety integrity, performance data is slightly reduced.
  • The master-slave controller redundancy switching time is generally less than 10ms.

Related Tags :

Processor Unit HI Module
View full details