| Number of Channels |
12 channels per terminal board (10 Analog Inputs, 2 Analog Outputs) |
| Input Span |
1 - 5 V DC, ±5 V DC, ±10 V DC, or 0-20 mA (Inputs 1-8), 0-20 mA or ±1 mA (Inputs 9-10) |
| Input Converter Resolution |
16-bit ADC |
| Scan Time |
Normal scan time: 5 ms (200 Hz); maximum controller frame rate: 100 Hz |
| Power Consumption |
Typical: 5.3 W; Worst case: 6.2 W |
| Compressor Stall Detection |
Detection and relay operation within 30 seconds |
| Input Signal Resolution |
16-bit ADC (Analog-to-Digital Converter) |
| Scan Rate |
Configurable; typically 10ms to 100ms per channel |
| Power Supply |
28 VDC nominal, with tolerances ±10% |
| Current Consumption |
400 mA @ 28 VDC |
| Operating Temperature Range |
-30°C to +65°C (-22°F to +149°F) |
| Storage Temperature Range |
-40°C to +85°C (-40°F to +185°F) |
| Humidity |
5% to 95% relative humidity, non-condensing |
| Dimensions |
195 mm (L) x 140 mm (W) x 50 mm (H) |
| Weight |
1.2 kg (approx.) |
| Mounting |
DIN rail or panel mount |
| Communication Protocol |
Ethernet-based communication via Modbus TCP/IP |
| Network Interfaces |
Dual 100 Mbps Ethernet ports with RJ45 connectors |
| Electromagnetic Compatibility (EMC) |
IEC 61000-4-3, IEC 61000-4-6 |
| Safety Standards |
UL, CE, CSA certified |
| Shock and Vibration |
Compliant with IEC 60068-2-6 (vibration) and IEC 60068-2-27 (shock) |
| Isolation |
Galvanic isolation between input channels and network interface |
