GE Fanuc IC698CPE020 RX7i PACSystems Series CPU Module
Introduction
The IC698CPE020PACSystems RX7i CPU provide enhanced performance and new features, including support for the Programmable Coprocessor Module (PCM), Communications Coprocessor Module (CMM), and the DLAN module.
New Features and Enhancements
Support for Programmable Coprocessor Module (PCM)
Support for Communications Coprocessor Module (CMM)
Support for DLAN Module
Expanded Bulk (%W) Reference Table Memory
Increased Performance of the CALL Function Block
Hardware Identification
Catalog Number
Circuit Board ID
IC698CPE020-BB (CPU)
VMIVME-007633-001 Rev. F
Specifications
Specification
Description
Processor Speed
700 MHz
Memory
10 MB
Ethernet Interface
10/100 Mbps, Auto-Sensing
Serial Ports
2 (RS-232/RS-485)
Backplane Compatibility
VME64 Standard
Operating Temperature Range
0 to 60 °C
Storage Temperature Range
-40 to 85 °C
Relative Humidity
5% to 95%, non-condensing
Input Power
5 VDC @ 2.5 A (12.5 W)
Battery Backup
Lithium battery, replaceable
Real-Time Clock
Yes
Supported Modules
The PACSystems RX7i supports various Series 90-70 modules, including:
Discrete Input/Output Modules
Analog I/O Modules
Genius Bus Controller
High-Speed Counter
Bus Transmitter/Receiver Modules
Installation and Operational Notes
Configuration of IP Address: Required before using Ethernet communications.
Default IP Address (0.0.0.0): Causes the Ethernet Interface to request a temporary IP address from a BOOTP server.
LAN Structure: Must be a tree, not a ring, to avoid network issues.
Backplane Communications Window: Proper setting required for Genius Redundancy.
