• 76683-50 Bently Nevada 35 mm Proximity Sensor
1 1

🚀 Originalni proizvodi, velika zaliha, brza dostava!

76683-50 Bently Nevada 35 mm Proximity Sensor

76683-50 Bently Nevada 35 mm Proximity Sensor

Technical Specifications:

Manufacturer:
Bently Nevada
Product No.:
76683-50
Condition:
In Stock
Product Type:
Proximity Sensor
Product Origin:
USA
Weight:
300g
Shipping port:
Xiamen
Warranty:
12 months

Specifications

Specifications were determined with a -24 Vdc supply, 10 k Ω load, and a 102 mm (4 in) diameter AISI 4140 steel target at +22°C (+72°F).

Input

Accepts one noncontacting 7200 series 35 mm Proximity Probe and Extension Cable.

Power

-18 Vdc to -24 Vdc at 12 mA maximum consumption.

Output Resistance

50 Ω.

Probe DC Resistance (nominal) (RPROBE)

5.0 Ω +2.85 Ω/m (0.866 Ω/ft).

Extension Cable DC Resistance (nominal)

  • Center conductor (RCORE): 2.80 Ω/m (0.850 Ω/ft).
  • Shield conductor (RJACKET): 0.05 Ω/m (0.016 Ω/ft).

Extension Cable Capacitance

68.8 pF/m (20.9 pF/ft) typical.

Field Wiring

Recommend using three-conductor shielded triad cable. Maximum length of 305 metres (1,000 feet) between the Proximitor Sensor and the monitor. Consult the manual for frequency roll-off at longer lengths.

Linear Range

12.7 mm (500 mils). Linear range begins at approximately 1.3 mm (50 mils) from target and is from 1.3 to 14.0 mm (50 to 550 mils) (approximately -1.5 to -11.5 Vdc).

Average Scale Factor (ASF)

0.79 V/mm (20 mV/mil) ±6% including interchangeability error when measured in increments of 1.3 mm (50 mils) over the 500 mil linear range.

Deviation from Best Fit Straight Line (DSL)

Less than ±0.33 mm (±12.8 mil).

Minimum Target Size

57 mm (2.25 in) in diameter (flat target).

Electrical Classification

Complies with the European CE mark. Hazardous area approvals not available.

Mechanical

  • Probe Tip Material: Molded thermoplastic.
  • Probe Case Material: 300 series stainless steel.

Probe and Extension Cable Specifications

95 Ω coaxial, fluoroethylene propylene (FEP) insulated probe cable in the following total probe lengths: 1, 5 or 9 metres.

Extension Cable Material

95 Ω coaxial, fluoroethylene propylene (FEP) insulated.

Proximitor Sensor Material

A380 aluminum.

System Length

5 or 9 metres including extension cable.

Extension Cable Armor (optional)

Flexible AISI 302 SST with FEP outer jacket.

Tensile Strength (maximum rated)

  • Probe tip to probe case: 22 N (5 lbf)
  • Probe case to connector: 133 N (30 lbf)

Connector Material

Silver-plated brass.

Probe Case Torque

68 N•m (600 in•lbf)

Maximum Connector-to-Connector Torque

0.565 N•m (5 in•lbf)

Total System Weight (typical)

0.86 kg (1.9 lbm)

Environmental Limits

Probe Temperature Range

  • Operating Temperature: -18°C to +177°C (0°F to +350°F)
  • Storage Temperature: -34°C to +177°C (-29°F to +350°F)

Extension Cable Temperature Range

Operating and Storage Temperature: -51°C to +177°C (-60°F to +350°F)

Proximitor Sensor Temperature Range

Operating and Storage Temperature: -34°C to +100°C (-29°F to +212°F)

Relative Humidity

95% non-condensing from +2°C to +100°C (+35°F to +212°F) when connectors are protected.

Ordering Information

76683-50

  • 76683: 35 mm Proximitor Sensor
  • -50: Option For combined system electrical length of 5 metres

Related Tags :

Proximity Sensor
Pogledajte sve detalje