IC695ALG608 | GE Fanuc | RX3i Analog Input Module

Non-Isolated Differential Analog Voltage/Current Input Module IC695ALG608

The IC695ALG608 module provides 8 single-ended or 4 differential input channels. These analog input modules can be configured for various ranges including current (0 to 20mA, 4 to 20mA, +/- 20mA) and voltage (+/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V). They are compatible with Box-style, Extended Box-style, Spring-style, or Extended Spring-style terminal blocks, with extended terminal blocks accommodating shielded wiring.

Module Features

• Completely software-configurable, no module jumpers to set
• Full autocalibration
• On-board error-checking
• Open-circuit detection for all voltage and 4-20mA inputs
• Configurable scaling and offsets per channel
• High/low alarm detection and reporting selectable per channel
• Module fault reporting
• Supports diagnostic point fault contacts in the logic program
• Flash memory for future upgrades
• Positive and negative Rate of Change Alarms
• Autocalibration at startup
• Configurable interrupts for channel alarms and faults
• Terminal Block insertion or removal detection

Specifications: IC695ALG608

• Input Ranges:
  • Current: 0 to 20mA, 4 to 20mA, +/- 20mA
  • Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V
• Backplane Power Requirements:
  • ALG608: 330 mA maximum @ 5.0V, 600 mA maximum @ 3.3V
  • ALG616: 450 mA maximum @ 5.0V, 600 mA maximum @ 3.3V
• CPU Version: RX3i CPU firmware version 3.0 and later
• Programmer Version: Machine Edition version 5.0 SP3 and later
• Power Dissipation within Module:
  • IC695ALG608: 4.83 watts maximum
  • IC695ALG616: 6.48 watts maximum
• Thermal Derating: None
• Resolution: 24 bit ADC converted to Floating Point or Integer
• Input Data Format: Configurable as floating point IEEE 32 bit or 16-bit integer in a 32-bit field
• Filter Options: 8Hz, 12Hz, 16Hz, 40Hz, 200Hz, 500Hz
• Module Scan Time: Depends on the number of acquisition cycles in the scan and the configured filter option
• Input Impedance: >100 Kohm voltage inputs
• Current Input Resistance: 249 ohms +/- 1%
• Open Circuit Detection Time: 1 second maximum
• Overvoltage: +/-60 VDC continuous, maximum
• Overcurrent: +/-28mA continuous, maximum
• Normal Mode Noise Rejection: 500 Hz: 0.0 dB
• Common Mode Noise Rejection: 120dB minimum @ 50/60 Hz
• Channel-Channel DC Crosstalk:
  • Single ended mode: -80 dB minimum
  • Differential mode, grounded common: -80 dB minimum
  • Differential mode, floating common: -60 dB minimum
• Calibrated Accuracy:
  • @ 13°C – 33°C with 8 Hz, 12 Hz, and 16 Hz filter: varies depending on range
  • @ 0°C – 60°C with 8 Hz, 12 Hz, and 16 Hz filter: varies depending on range
• Calibration Interval: 12 months typical
• Isolation Voltage terminal block to backplane/chassis: Opto-isolated, transformer isolated 250 VAC continuous/1500 VAC for 1 minute