GE Fanuc IC200ALG264 Analog Input Module

IC200ALG264

Analog Input Module, 15 Bit Current 15 Channels

Module Specifications

Module Characteristics

• Channels: 15 single-ended, one group
• Module ID:
  • FFFFB50F (when configured for 4-20mA range)
  • FFFFB40F (when configured for 0-20mA range)
• Isolation:
  • User input to logic (optical) and to frame ground: 250VAC continuous; 1500VAC for 1 minute
  • Group to group: Not applicable
  • Channel to channel: None
• LED Indicators: OK LED. See "LED Indicators" for description.
• Backplane Current Consumption: 5V output: 100mA maximum
• External Power Supply: None
• Thermal Derating: None
• Configuration Parameters: Range select (jumpers on carrier)
• Diagnostics: Loss of Internal Power, Open wire detection of 4-20mA signals only

Input Characteristics

• Input Current:
  • 4 to 20mA (default: no terminal jumper installed)
  • 0 to 20mA (with terminal jumper installed)
• Input Impedance: 100 Ohms
• Accuracy at:
  • 25 degrees C*: +/-0.3% typical of full scale, +/-0.5% maximum of full scale
  • 0 to 60 degrees C: +/-1% maximum of full scale
• Resolution: 15 bits
  • 0.5µA = 1 count (for 4-20mA range)
  • 0.625µA = 1 count (for 0-20mA range)
• Filter Response (3dB Corner Frequency): 24 Hz +/-20%
• Update Rate per Module: 7.5ms

Compatibility

• VersaPro Software: Version 2.0 or higher
• VersaMax PLC CPU Firmware: Version 2.10 or higher
• VersaMax Ethernet NIU Firmware: Version 1.10 or higher
• VersaMax DeviceNet, Profibus, or Genius NIU Firmware: Planned for future release

In the presence of severe RF interference (IEC 1000-4-3, 10V/m), accuracy may be degraded to +/-2%