🚀 Originálne produkty, obrovské zásoby, rýchle dodanie!
FC-FANWR-24R Honeywell Fan Assembly Kit
FC-FANWR-24R Honeywell Fan Assembly Kit
Technical Specifications:
Introduction
The FS-FANWR-24R is a 24 V DC fan unit comprising two fans and a PCB 07209 mounted on a plate. It features:
Component Composition
Consists of two fans and a printed circuit board (PCB) 07209 on a mounting plate.
Power and Wiring
External 24 V DC power and readback contact wiring terminate on a 4-pole connector that slots into the fan unit.
Fan Status Indication
Electronics generate signals to indicate fan status. A green LED illuminates next to a fan if its speed is above the minimum. If both fans exceed minimum speed, the readback contact closes.
Safety Features
Finger guards are installed on both sides of the fans.
Airflow Direction
The layout diagram depicts the direction of airflow, providing a bottom and side view of the fan unit.
General Type
FS-FANWR-24R
Approvals
CE; UL; FM
Fan Details
Make: Papst
Model: 4184N/17X (ball bearing)
Finger Guard Details
Make: Papst
Model: LZ30
Power Requirements
- Voltage: 24 V DC
- Power: 9.5 W
- Voltage Range: 12-29 V DC
- No reverse polarity protection
Performance
- Air Flow: 360 m³/hr., 211.8 CFM (for the complete unit)
- Noise: 52 dB (for the complete unit)
- Nominal Fan Speed: 3,200 RPM
- Minimum Speed: 1,500 ± 100 RPM (to close readback contact)
Life Cycle
- 85,000 hrs at 40°C (104°F)
- 37,500 hrs at 75°C (167°F)
Ingress Protection: IP20
Temperature Range: -30°C to +75°C (-22°F to +167°F)
Readback Contact Details
- Max. Switched Voltage: 300 V DC / 240 V AC
- Max Switched Current: 0.5 A
- Max. Switched Power: 10 W
-
Connector:
- Wire stripping length: 7 mm
- Tightening torque: 0.4-0.5 Nm
- Type of screwdriver: SD 0.6 X 3.5 -DIN 5264
Physical Dimensions
- 391x142x51 mm (LxWxD)
- 15.4x5.59x2.01 in (LxWxD)
- Weight: 1.7 kg
