The Honeywell FS-PDC-ART05 power distribution cable is designed to transfer 5V power and watchdog signals from CP1 or CP2 to an Input/Output chassis within a Safety Manager A.R.T. system.
Signals
The pin assignment for the FS-PDC-ART05 connectors is as follows:
Pin
CP1 Signal
CP2 Signal
1
5V of CP1
5V of CP2
2
Ground
Ground
3
WD (Watchdog) of CP1
WD (Watchdog) of CP2
Technical Data
General
Type Number: FS-PDC-ART05
Approvals: UL, CSA (pending)
Cable
Type: SAB 02040415
Model: CC600 4 × 1.5 mm²
Length: 2 meters
Connectors
Type: 3-pole socket connector
Make: Weidmuller BLZ 5.08/03/180F SN BK
Note: If the FS-PDC-ART05 is used as a replacement for the FS-PDC-MB24-1, the connector on the FTA side should be replaced with the connector from the old cable.
