GE Fanuc IC698CRE030 Rx7i CPU Module

Introduction

The RX7i CPUs are programmed and configured by the programming software to perform real-time control of machines, processes, and material handling systems. The CPU communicates with I/O and smart option modules over a rack-mounted backplane using the VME64 Standard format. It communicates with the programmer and HMI devices via the embedded Ethernet ports or a serial port using SNP Slave protocol.

Specifications

Note: For environmental specifications and compliance to standards (for example, FCC or European Union Directives), refer to Appendix A of the PACSystems RX7i Installation Manual, GFK-2223.

• Battery: Memory retention. For battery selection, installation and estimated life, refer to the PACSystems Controller Battery and Energy Pack Manual, GFK-2741.
• Program storage: Up to 64 Mbytes of battery-backed RAM, 64 Mbytes of non-volatile flash user memory.
• Power requirements:
  • CPE030:
    • +5 VDC: 3.2 Amps nominal
    • +12 VDC: 0.003 Amps nominal
    • -12 VDC: 0.003 Amps nominal
  • CPE040:
    • +5 VDC: 6.8 Amps nominal
    • +12 VDC: 0.003 Amps nominal
    • -12 VDC: 0.003 Amps nominal
• Operating temperature:
  • CPE030: 0 to 50°C (32°F to 122°F)
  • CPE040: 0 to 60°C (32°F to 140°F) with fan tray
• Boolean execution speed, typical:
  • CPE030: 0.069ms per 1000 Boolean contacts/coils
  • CPE040: 0.02391ms per 1000 Boolean contacts/coils
• Time of Day Clock accuracy: Maximum drift of ±2 seconds per day
• Elapsed Time Clock (internal timing) accuracy: ±0.01% maximum
• Embedded communications: RS-232, RS-485, Ethernet interface
• Serial Protocols supported: Modbus RTU Slave, SNP, Serial I/O
• Ethernet Ports: Embedded auto-sensing 10/100 Mbps half/full duplex Ethernet interface
• VME Compatibility: System designed to support the VME64 standard ANSI/VITA 1
• Program blocks: Up to 512 program blocks. Maximum size for a block is 128KB.
• Memory:
  • %I and %Q: 32Kbits for discrete
  • %AI and %AQ: configurable up to 32Kwords
  • %W: configurable up to the maximum available user RAM
  • Managed memory (Symbolic and I/O variables combined): configurable up to 10 Mbytes

Ethernet Interface Specifications

• Web-based data monitoring: Up to 16 web server and FTP connections (combined)
• Ethernet data rate: 10Mb/sec and 100Mb/sec
• Physical interface: 10BaseT RJ45
• WinLoader support: Yes
• Number of EGD configuration-based pages: 255
• Time synchronization: SNTP
• Selective consumption of EGD: Yes
• Load EGD configuration from RX7i to programmer: Yes
• Remote Station Manager over UDP: Yes
• Local Station Manager (RS-232): Dedicated RS-232 port
• Configurable Advanced User Parameters: Yes