Emerson VE5001 KJ1501X1-BA2 DeltaV System Power Supply

Description

AC/DC System Power Supply Specifications

Input

100V AC to 264V AC, 47 Hz to 63 Hz, single-phase

Inrush (Soft Start)

35 A peak maximum for one cycle or less at 230V AC input

Output Power

25 W total at 60°C

Output Voltages

• +12V DC at 2.1 A maximum
• +5V DC at 2.0 A maximum
• +3.3V DC at 0.5 A maximum
• Combined 5V DC and 3.3V DC output = 10 W maximum

Input Protection

Internally fused, non-replaceable

Overvoltage Protection

Output protected at 110 to 120%

Hold-up Time

Output: remains within 5% of nominal at full load and 155V AC input for 20 ms

Temperature

• Operating: 0 to 60°C (32 to 140°F) without derating
• Storage: -40 to 70°C (-40 to 158°F)

Relative Humidity

5 to 95%, non-condensing

Airborne Contaminants

ISA-S71.04 - 1985 Airborne Contaminants Class G2

Hazardous Areas

Class I, Div. II approval

Shock

10 g ½-sine wave for 11 ms

Vibration

1 mm peak-to-peak from 5 Hz to 16 Hz, 0.5 g from 16 Hz to 150 Hz

Mounting

On either slot of 2-wide power/controller carrier

LED Indicators

• Green—AC power: Input AC power is applied and internal fuse is sound
• Red—Error: Outputs are not within ±4% of nominal (normal conditions)

External Connectors

• Primary power AC input: 3-wire
• Alarm contact: 2-wire normally open relay; relay is closed when outputs are within ±4% of nominal; 2.0 A at 30V DC, 2.0 A at 250V AC

Environmental Rating

FM Class 1 Div 2, GP. A, B, C, D, Hazardous location, T4

Power Calculations

One VE5001 AC/DC system power supply is sufficient for many small DeltaV installations. The power supply provides 1.75 A to the I/O subsystem. This is enough for:

• 8 discrete I/O cards
• 8 analog I/O cards
• 4 serial I/O cards
• 4 Series 2 H1 cards

Ordering Information