1783-ETAP2F Rockwell Allen-Bradley EtherNet/IP Tap

Specifications:

Power Consumption

• Maximum Power Consumption: 6.24 W
• Maximum Current Consumption: 260 mA @ 24V DC
• DC Power Supply Voltage Rating: 24V DC (20.4…27.6V DC)

Ethernet Connections

• Connector Type: RJ45 connector according to IEC 60603-7
• Cable Requirements:
  • Category 5e minimum cable according to TIA 568-B.1
  • Category 5 cable according to ISO/IEC 24702

DC Power Connections

• Single Wire: 0.33…3.3 mm² (22…12 AWG)
• Two Wires: 0.33…1.3 mm² (22…16 AWG) solid
• Wire Type: Stranded copper wire rated at 75 °C (167 °F) or greater
• Insulation: 1.2 mm (3/64 in.) maximum
• Torque: 0.6…0.8 N•m (5…7 lb•in) on power connector

Temperature Specifications

• Operating Temperature: -25 °C ≤ Ta ≤ +60 °C (-13 °F ≤ Ta ≤ +140 °F)
• Maximum Surrounding Air Temperature (Ta): 60 °C (140 °F)

Status Indicators

OK Indicator

• Off: Tap is not powered.
• Flashing Green: Tap is not configured.
• Steady Green: Tap is powered, configured, and operating correctly.
• Flashing Red: Recoverable fault, such as duplicate IP address or update in progress, is detected.
• Steady Red: Unrecoverable fault detected.

LINK1, LINK2 Indicators

• Off:
  • No link.
  • Port administratively disabled.
  • Port disabled due to rapid ring fault condition, and this tap is the active ring supervisor (LINK 2).
  • Ring network has encountered a rare, partial network fault, and this tap is the active supervisor (LINK 2).
• Green:
  • A 100 Mbps (full or half-duplex) link exists.
  • The ring network is operating normally and this tap is the active supervisor (LINK 2).
• Flashing Green: A 100 Mbps link exists and there is activity.
• Steady Yellow:
  • A 10 Mbps (full or half-duplex) link exists.
  • The ring network is operating normally and this tap is the active supervisor (LINK 2).
• Flashing Yellow: A 10 Mbps link exists and there is activity.