VE3008 Emerson DeltaV | MQ Controller

VE3008 KJ2005X1-MQ1 12P6381X042 DeltaV MQ Controller

Technical Specification:

Power, Mounting, and Memory

• Power Requirement: Supplied by System Power Supply through 2-wide Power/Controller Carrier
• Fuse Protection: 3.0 A, non-replaceable fuses
• Power Dissipation:
  • Typical: 5.0 W
  • Maximum: 7.0 W
• Mounting: On right slot of power/controller carrier
• User Memory: 48 MB
• Primary Control Network: 8-pin RJ-45 connector
• Redundant Control Network: 8-pin RJ-45 connector

Environmental

• Operating Temperature: -40° to 70°C (-40° to 158°F)
• Storage Temperature: -40° to 85°C (-40° to 185°F)
• Relative Humidity: 5 to 95%, non-condensing
• Airborne Contaminants: ISA-S71.04-1985 Airborne Contaminants Class G3, conformal coating
• Shock (Normal Operating Conditions): 10 g ½-sine wave for 11 ms
• Vibration (Operative Limit):
  • 1 mm peak-to-peak from 5 Hz to 16 Hz
  • 0.5 g from 16 Hz to 150 Hz

LED Indicators (ON Status)

• Green – Power: Indicates DC power is applied
• Red – Error: Indicates an error condition
• Green – Active: Indicates that the controller is operating as the primary controller
• Green – Standby: Indicates that the controller is operating as a backup controller (reserved for future use)
• Yellow Flashing – Pri. CN: Indicates valid primary control network communication
• Yellow Flashing – Sec. CN: Indicates valid secondary control network communication
• All except Power flashing: Visual identification of controller initiated from user interface software by ping command
• All except Power flashing, alternating even and odd: Firmware upgrade in progress