1 3

🚀 Γνήσια προϊόντα, τεράστιο απόθεμα, γρήγορη αποστολή!

IC695PSD140 GE Fanuc Multipurpose Power Supply

IC695PSD140 GE Fanuc Multipurpose Power Supply

Technical Specifications:

Manufacturer:
GE
Product No.:
IC695PSD140
Condition:
In Stock
Product Type:
Power Supply
Product Origin:
USA
Weight:
910g
Shipping port:
Xiamen
Warranty:
12 months

Introduction

PACSystems RX3i Power Supply IC695PSD140 is a multipurpose 40-Watt supply that operates from an input voltage source in the range of 18 VDC to 30 VDC. This power supply provides three outputs:

  • +5.1 VDC output
  • +24 VDC relay output that can be used to power circuits on Output Relay modules.
  • +3.3 VDC. This output is used internally by RX3i modules with IC695 catalog numbers. Multipurpose Power Supply IC695PSD140 is suitable for use in load-sharing and redundancy applications. It must be installed in a PACSystems RX3i (IC695 catalog number) Universal Backplane. It can be used as the only power supply in the backplane, or combined with up to three additional Multipurpose Power Supplies.

Specifications: IC695PSD140

Specification Description
Nominal Rated Voltage 24 VDC
Input Voltage Range 18 to 30 VDC
Input Power 60 Watts maximum at full load
Inrush Current 4 Amps, 100 milliseconds maximum †
Output Power 40 Watts maximum total of both outputs. 5.1 VCD = 30 Watts maximum, 3.3 VDC = 30 Watts maximum. Maximum output power depends on ambient temperature, as shown.
Output Voltage 5.1 VDC: 5.0 VDC to 5.25 VDC (5.1 VDC nominal), 3.3 VDC: 3.2 VDC to 3.465 VDC (3.3 VDC nominal)
Output Current 5.1 VDC: 0 to 6 Amps, 3.3 VDC: 0 to 9 Amps
Isolation None
Ripple (all outputs) 50 mV
Noise (all outputs) 50 mV
Ride-through time 10 ms. This is the length of time the Power Supply maintains valid outputs if the power source is interrupted. If this Power Supply is used with IC694 and IC693 modules that have relay outputs, special precautions should be taken because dropouts in the source voltage will be seen by the module and could cause relay dropouts.
Wiring Terminals Each terminal accepts one 14 AWG to 22 AWG wire.
Terminal Current 6 Amps
Number of Daisy-Chained PSD140 Supplies Up to 4
Number of PSD140 Supplies in Universal Backplane Up to 4
Installation Environment For use in Pollution Degree 2 environments only

Related Tags :

Power Supply
Προβολή όλων των λεπτομερειών