1 1

🚀 Γνήσια προϊόντα, τεράστιο απόθεμα, γρήγορη αποστολή!

IC200ALG230 GE VersaMax Analog Input module

IC200ALG230 GE VersaMax Analog Input module

Technical Specifications:

Manufacturer:
GE
Product No.:
IC200ALG230
Condition:
In Stock
Product Type:
Analog Input Module
Product Origin:
USA
Weight:
200g
Shipping port:
Xiamen
Warranty:
12 months

Analog Input Module, 12-Bit Voltage/Current, 4 or 8 Channels

Product Description

The Analog Input Module IC200ALG230 / BXIOAI4 provides an interface to either 4 voltage inputs or 4 current inputs. The Analog Input Module IC200ALG260 / BXIOAI8 provides an interface to either 8 voltage inputs or 8 current inputs.

Power Supply

The module receives power from the backplane power supply. No external power source is required for module operation. Power for the user’s transceivers must be supplied from an external source.

Diagnostics

The module reports a Loss of Internal Power fault for field-side circuits.

LED Indicators

  • INT PWR LED: Indicates the presence of internally-generated field power for the analog field-side circuits.
  • OK LED: Indicates when backplane power is present to the module.

Configuration Parameters

Two jumpers on the carrier terminals can be used to configure voltage or current mode and unipolar or bipolar operation in voltage mode.

  • Voltage/Current Mode Jumper: With this jumper connected, the module accepts current inputs in the 4mA to 20mA range. With no jumper installed, the module accepts -10VDC to +10VDC inputs.
  • Range Select Jumper (Voltage Mode): This jumper can be used to select the 0 to 10VDC range.

Preinstallation Check

Carefully inspect all shipping containers for damage. If any equipment is damaged, notify the delivery service immediately. Save the damaged shipping container for inspection by the delivery service. After unpacking the equipment, record all serial numbers. Save the shipping containers and packing material in case it is necessary to transport or ship any part of the system.

Module Characteristics

Characteristic IC200ALG230 / BXIOAI4
Channels 4 single ended, one group
Module ID FFFF9004
Isolation
User input to logic (optical) and to frame ground 250VAC continuous; 1500VAC for 1 minute
Group to group Not applicable
Channel to channel None
LED Indicators
INT PWR LED Indicates internally-generated field power is present
OK LED Indicates backplane power is present
Backplane Current Consumption 5V output: 125mA max.
External Power Supply None
Thermal Derating None
Configuration Parameters Range select, Mode select (jumpers on carrier)
Diagnostics Loss of Internal Power

Input Characteristics: Voltage Mode (Default)

Characteristic Specification
Input voltage Bipolar: +/-10VDC (default), Unipolar: 0 to 10V (configurable)
Input impedance 126kOhms maximum
Accuracy at 25°C +/-0.3% typical of full scale, +/-0.5% maximum of full scale
Accuracy at 0 to 60°C +/-1% maximum of full scale
Resolution Bipolar mode: 2.5mV = 8 counts, Unipolar mode: 2.5mV = 8 counts
Filter response 5.0ms
Update rate per module 0.4ms
Common mode voltage 0 V
Channel-to-channel crosstalk rejection 30dB minimum

Input Characteristics: Current Mode

Characteristic Specification
Input current 4 to 20mA
Input impedance 200 Ohms maximum
Accuracy at 25°C +/-0.3% typical of full scale, +/-0.5% maximum of full scale
Accuracy at 0 to 60°C +/-1% maximum of full scale
Resolution 4μA = 8 counts
Filter response 5ms
Update rate per module 0.4ms
Channel-to-channel crosstalk rejection 30dB minimum

Related Tags :

Analog Input Module
Προβολή όλων των λεπτομερειών