GE Fanuc IC693CPU350 Single slot CPU module

Technical Specifications of Single Slot CPU Module

• Manufacturer: GE Fanuc
• Product No.: IC693CPU350
• Total Baseplates per System: 8 (CPU baseplate + 7 expansion and/or remote)
• CPU Type: Single slot CPU module
• Total Baseplates per System: 8 (CPU baseplate + 7 expansion and/or remote)
• Load Required from Power Supply: 670 milliamps from +5 VDC supply
• Processor Speed: 25 MegaHertz
• Processor Type: 80386EX
• Typical Scan Rate: 0.22 milliseconds per 1K of logic (Boolean contacts)
• User Program Memory (maximum): 32K Bytes (not configurable)
• Discrete Input Points (%I): 2,048
• Discrete Output Points (%Q): 2,048
• Discrete Global Memory (%G): 1,280 bits
• Internal Coils (%M): 4,096 bits
• Output (Temporary) Coils (%T): 256 bits
• System Status References (%S): 128 bits (%S, %SA, %SB, %SC - 32 bits each)
• Register Memory (%R): 9,999 words
• Analog Inputs (%AI): 2,048 words
• Analog Outputs (%AQ): 512 words
• System Registers (for reference table viewing only): 28 words (%SR)
• Timers/Counters: >2,000
• Shift Registers: Yes
• Built-in Serial Port(s): 1 (uses connector on PLC power supply). Supports SNP, SNP-X slave protocols. Requires CMM module for SNP/SNP-X master, CCM, or RTU (slave) protocol support. Requires PCM module for RTU master support.
• Communications: LAN – Supports multidrop. Also supports Ethernet, FIP, Profibus, GBC, GCM, and GCM+ option modules.
• Override: Yes
• Battery Backed Clock: Yes
• Interrupts: Supports the periodic subroutine feature.
• Type of Memory Storage: RAM and Flash
• PCM/CCM Compatibility: Yes
• Floating Point Math Support: Yes, firmware-based in firmware releases 9.0 and later.