AO801 3BSE020514R1 ABB Analog Output Module

Description

The ABB AO801 Analog Output Module features 8 unipolar analog output channels designed for industrial automation systems. The module performs cyclic self-diagnostics to ensure reliable operation. In the event of a low internal power supply, the module transitions to INIT state, meaning no signal is output. This module is ideal for applications requiring precise analog signal control and robust error handling.

Features and Benefits

• 8 Output Channels: Supports 0...20 mA and 4...20 mA outputs.
• Error Handling: Outputs are set to a predetermined state upon error detection (OSP).
• Short Circuit Protection: Analog outputs are secured against short circuits to ZP or +24 V.
• Easy Connection: Process and power connections are made via detachable connectors.

General Information

• Article Number: 3BSE020514R1
• Type: Analog Output
• Signal Specification: 0...20 mA, 4...20 mA
• Number of Channels: 8
• Signal Type: Unipolar single-ended
• HART: No
• SOE: No
• Redundancy: No
• High Integrity: No
• Intrinsic Safety: No
• Mechanics: S800L

Detailed Data

• Resolution: 12 bit
• Isolation: Groupwise isolated from ground
• Under/Over Range: - / +15%
• Output Load: Max 850 Ω
• Error: 0.1%
• Temperature Drift: Typical 30 ppm/°C, Maximum 50 ppm/°C
• Rise Time: 10 µs
• Update Cycle Time: 1 ms
• Current Limiting: Short circuit proof current limited output
• Maximum Field Cable Length: 600 meters (656 yards)
• Rated Insulation Voltage: 50 V
• Dielectric Test Voltage: 500 V AC
• Power Dissipation: 3.8 W
• Current Consumption:
  • +5 V Modulebus: 70 mA
  • +24 V External: 200 mA
• Supported Wire Size:
  • Solid: 0.05-2.5 mm², 30-12 AWG
  • Stranded: 0.05-1.5 mm², 30-12 AWG
• Recommended Torque: 0.5-0.6 Nm
• Stripping Length: 6-7.5 mm, 0.24-0.30 inch

Diagnostics

• Front LEDs: Indicate Status (run or fault)
• Status Indication: Module Error, Module Warning, Channel error

Environment and Certification

• CE Mark: Yes
• Electrical Safety: EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201
• Hazardous Location: C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2
• Marine Certification: ABS, BV, DNV, LR
• Operating Temperature: 0 to +55 °C (+32 to +131 °F), approvals for +5 to +55 °C
• Storage Temperature: -40 to +70 °C (-40 to +158 °F)
• Pollution Degree: Degree 2, IEC 60664-1
• Corrosion Protection: ISA-S71.04: G3
• Relative Humidity: 5 to 95 %, non-condensing
• Max Ambient Temperature: 55 °C (131 °F), for vertical mounting 40 °C (104 °F)
• Protection Class: IP20 according to IEC 60529
• Mechanical Operating Conditions: IEC/EN 61131-2
• EMC: EN 61000-6-4 and EN 61000-6-2
• Overvoltage Categories: IEC/EN 60664-1, EN 50178
• Equipment Class: Class I according to IEC 61140; (earth protected)
• RoHS Compliance: DIRECTIVE/2011/65/EU (EN 50581:2012)
• WEEE Compliance: DIRECTIVE/2012/19/EU

Dimensions and Weight

• Width: 86.1 mm (3.4”)
• Depth: 58.5 mm (2.3”)
• Height: 110 mm (4.33”)
• Weight: 0.24 kg (0.53 lbs.)

The ABB AO801 Analog Output Module provides reliable and precise analog signal control for various industrial applications, featuring robust diagnostics, easy installation, and comprehensive protection measures.