IC697MDL740 24/48 Volt DC, 2-Amp, 16-Point Output Module
Features
16 Output Points: Four isolated groups of four points each.
3 Amps Capacity per Point
High Inrush Capacity: 10 times the rated current.
Functions
The 24/48 Volt DC 2 Amp Output Module offers 16 output points in four isolated groups, allowing flexibility in usage across different AC phases. Each group is individually fused for protection with a 10-amp fuse. The module accommodates high inrush currents, suitable for various inductive and incandescent loads, including size-4 contactors.
LED indicators display the ON/OFF status of each point, with corresponding circuit labeling provided on the module. An additional "FUSE" indicator illuminates if a fuse opens. The module is mechanically keyed for correct replacement.
I/O references are user-configurable through PLC programming software, eliminating the need for DIP switches or jumpers.
Specifications for IC697MDL740
Rated Voltage: 24 or 48 volts DC
Outputs per Module: 16 (four groups of four outputs each)
Isolation:
1500 volts – any output to backplane
500 volts between groups
Output Voltage Range: 20 to 60 volts
Output Current:
2 amps maximum per point
4 amps maximum per group
Output Characteristics:
Inrush Current: 20 amps maximum for 20 ms
Output Voltage Drop: 0.8 volt (0.4 ohm) maximum
Response Time–On: 2 ms maximum
Response Time–Off: 2 ms maximum
Output Leakage: 1 mA maximum
Current Required from 5V Bus: 0.15 amp
VME Compatibility: System designed to support the VME standard C.1
