1 3

🚀 Orijinal məhsullar, geniş inventar, sürətli çatdırılma!

CC-PUIO31 Honeywell Universal I/O Module 51454220-176

CC-PUIO31 Honeywell Universal I/O Module 51454220-176

Technical Specifications:

Manufacturer:
Honeywell
Product No.:
CC-PUIO31
Condition:
In Stock
Product Type:
Universal I/O Module
Product Origin:
USA
Weight:
300g
Shipping port:
Xiamen
Warranty:
12 months

Universal Input Output – CC-PUIO31

Function

The Universal Input Output module interfaces with analog input, analog output, digital input, and digital output field devices.

Notable Features

  • Each channel user configurable as:
    • Analog Input
    • Analog Output
    • Digital Input
    • DISOE - Sequence of Events (1ms resolution SOE, 20ms PV scan)
    • Digital Output
    • Pulse Input (any four channels)
    • Open Wire Detection
    • Electronic short circuit protection (1)
    • Fast Scan (Priority I/O Module Scan)
    • Safe-state (FAILOPT) behaviors configurable on a per channel basis for Digital / Analog Output
    • HART 7 support (Analog I/O)
    • HART Modem per Channel for Fast Performance
    • Extended Temperature Range -40 to +70°C module ambient

Model Specifications

Parameter Specification
Universal Process IO Module CC-PUIO31
IOTA Model Numbers

CC-TUIO31 Non Redundant 9”

CC-TUIO41 Redundant 12”

Note 1: Each signal can be shorted in the field with no damage to the IOM or IOTA. Other channels on the same IOM will not be affected. AI, AO and DI channels are further protected and certified to support energy limited / nonincendive field wiring connections to Zone 2 / Division 2 hazardous locations.

Detail Specifications – Analog Input

Parameter Specification
Input type Current (2, 3, or 4 wire devices)
Input Channels 32 Maximum per module (with or without open wire detect)
A/D Converter Resolution 16 bit
Input Range 0-20 mA or 4-20 mA
Normal Mode Rejection Ratio 18 dB at 50 Hz, 20 dB at 60 Hz
Input Filter Response Single pole, -3dB @ 6 Hz
Crosstalk, dc to 60 Hz (channel-to-channel) 60 dB
Input Impedance 250 Ω
Input Voltage Range (any input referenced to common, no damage) +33 VDC to -1 VDC
Input Scan Rate 10 ms
Hardware accuracy

0.1% of full-scale (23.5 ± 2°C)

0.175% of full-scale (0 to +70°C)

0.25% of full-scale (-40 to +70°C)
Short Circuit Current Limit 25 mA

Detail Specifications – Pulse Input

Parameter Specification
Channels Any 4 channels
Frequency 0-15 kHz
Minimum Pulse Width 25 µs
Duty Cycle Any Duty Cycle that meets the Minimum Pulse Width specification

Detail Specifications – Analog Output with HART (1)

Parameter Specification
Output Type 4-20 mA
Output Channels 32 Maximum per module 
Output Temperature Drift 0.007% of Full Scale/°C
Output Readback Diagnostic ± 4% of Full Scale
Output Current Linearity ± 0.05% of Full Scale (nominal)
Resolution 12 bit
Calibrated Accuracy < 0.35% of Full Scale (25°C) including linearity
Directly Settable Output Current Range 0 mA, 2.9 mA to 21.1 mA
Maximum Resistive Load (24 V supply) 825 ohms @ 20 mA
Maximum Output Compliant Voltage (24 V supply) 16.5 VDC @ 20 mA
Open Circuit Voltage Supply Voltage (26 VDC maximum)
Response Time, DAC input code to output (within 3% of final value)

80 ms in HART mode

0.25 ms in non-HART mode
Gap (0 mA) of Output to Field on Switchover 0 ms (both partners continuously active)

Note 1: If an AO channel's configuration is changed from non-HART to HART, and the analog OP remains energized, there will be a disturbance of the output of no more than 65ms while the channel is reloaded. Changing an AO channel from HART to non-HART will not produce any OP disturbance.

Detail Specifications – Digital Input with OWD

Parameter Specification
Open Circuit Voltage Supply Voltage (26 VDC maximum)
Closed contact current 7 mA (maximum)
Closed contact detection 3.1 mA < I < 7 mA
Open contact detection 0.9 mA < I < 2.0 mA
Open wire detect I < 0.9 mA
Digital Input Resolution for Sequence of Events (SOE) 1ms (any /all Channels)

Detail Specifications – Digital Input without OWD

Parameter Specification
Open Circuit Voltage Supply Voltage (26 VDC maximum)
Closed contact current 7 mA (maximum)
Closed contact detection I > 3.2 mA
Open contact detection I < 2.0 mA
Digital Input Resolution for Sequence of Events (SOE) 1ms (any /all Channels)

Detail Specifications – Digital Output

Parameter Specification
Output Channels 32 Maximum per module (with or without open wire detect)
Output Type Solid state source, short circuit protected 
Load Current Off < 0.1 mA
Load Current On

1 mA Minimum to 0.5 A Maximum per channel

9 A Maximum per module 
On-State Voltage 24 V (typ), load current @ 0.5 A
Off-State Voltage 0 V
Off-State Leak Current < 0.1 mA
Gap (0 current) of Output to Field on Switchover 0 ms

Related Tags :

Universal I/O Module
Tam təfərrüatlara baxın