ABB CI868 3BSE048845R1 Communication Interface Module
UBEST – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Description and Introduction
The CI868 can be used to connect an AC 800M controller to external Ethernet devices using the IEC 61850 – Edition 2 standard. Since this is a standard for Substation Automation, it allows the combination of Process Automation and Electrical Control in the same controller.
The TP868 Baseplate has two RJ45 Ethernet connectors. The CH1 connector can use 10Mbps or 100Mbps (Megabits/sec.). The baseplate has a code lock that prevents the installation of an incorrect type of unit onto the TP867 Baseplate.
The CI868 expansion unit contains the CEX-Bus logic, a communication unit, and a DC/DC converter that supplies appropriate voltages from the +24 V supply via the CEX-Bus. The Ethernet cable must be connected to the main network through an Ethernet switch.
Key Features
- CEX-Bus Module
- MPC862P 96MHz
- 32 MB SDRAM with Parity
- 4 MB Flash PROM
- Ethernet/IEEE 802.3u supporting Fast Ethernet 10/100Mbps operation
- Supports IEC 61850 Protocol
- 10/100 Mbps using IEEE Standard Media (MII)
Basic Technical Data Sheet
| Item | Data |
|---|---|
| Type | Ethernet Device |
| Protocol | IEC 61850 |
| CH1 Communication Rate | 10 Mbit/s / 100 Mbit/s based on IEEE 802.3u 10/100baseTX |
| Status Indication |
Normal Operation: Green Abnormal Fault: Red |
| 2x Communication Indicators |
RxTx1 and RxTx2 – Status indicated by data flow control: Yellow Flashing As Main Operation: Yellow Running in Redundant Configuration: Yellow |
| Connection Terminal | RJ45 |
| Current Consumption (from CEX-Bus 24VDC) | 160 mA typical (250 mA maximum) |
| Power | 3.8 W typical |
| Protection Class | IP20 compliant with EN60529, IEC 529 |
| Weight | 700 g (1.5 lb) |
| Dimensions | W 59 x H 185 x D 127.5 mm (2.9 x 7.3 x 5.0 in) |
