Provides 6 Mbytes of battery-backed memory in the same slot
Contains 256K of non-volatile user flash memory
Supports BMA in release 7.92 and later
Supports floating-point calculations
12K inputs and outputs (any mix), and up to 8K analog I/O
0.4 microseconds per boolean function
96 MHz, 80486DX4 microprocessor
Supports IC66 (can be IC660 or IC661) and IC697 I/O
Programmed by MS-DOS software products, or Windows-based software products running on Windows 95 or Windows NT over Ethernet TCP/IP or through an SNP port
Configurable data and program memory
Battery-backed calendar clock
Three-position operation mode switch
Password-controlled access
Remote programmer keyswitch memory protection
Seven status LEDs
Software configuration (No DIP switches or jumpers)
Reference information inside the front door
In-system upgradable firmware
Specifications for IC697CPX928
Battery: Shelf life 5 years at 20°C (68°F) Battery: Memory retention 6 months nominal without applied power. Current required from 5V bus: 3.1 Amps nominal Operating Temperature: 0 to 60°C (32°F to 140°F); 70 CFM forced air required 0 to 50°C (32°F to 122°F); without forced air Time of Day Clock accuracy: ± 3.5 seconds per day maximum Elapsed Time Clock (internal timing) accuracy: ± 0.01% maximum
Serial Ports:
Port 1: RS-232 compatible
Port 2: RS-485 compatible (optocoupler isolated)
Port 3: RS-485 compatible (not isolated)
Programmer Serial Attachment, or other serial devices Protocols supported: SNP Slave only
VME Compatibility: System designed to support the VME standard C.1
