GE Fanuc IC698CPE010 RX7i CPU Module

Introduction

The RX7i CPUs are programmed and configured by the programming software to perform real-time control of machines, processes, and material handling systems. The CPU communicates with I/O and smart option modules over a rack-mounted backplane using the VME64 Standard format. It communicates with the programmer and HMI devices via the embedded Ethernet ports or a serial port using SNP Slave protocol.

Features

Note: For additional features, refer to the Important Product Information document provided with each CPU.

• Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user memory.
• Provides access to bulk memory via reference table %W. The upper limit of this memory area can be configured to the maximum available user RAM.
• Configurable data and program memory.
• Programming in Ladder Diagram and C.
• Supports auto-located Symbolic Variables that can use any amount of user memory.
• Reference table sizes include 32Kbits for discrete %I and %Q and up to 32Kwords each for analog %AI and %AQ.
• Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223.
• Supports all non-GE Fanuc VME modules supported by Series 90-70.
• Supports PLC data monitoring over the web. Allows a combined total of up to 16 web server and FTP connections.
• Supports up to 512 program blocks. Maximum size for a block is 128KB.
• Test Edit mode allows you to easily test modifications to a running program.
• Bit-in-word referencing allows you to specify individual bits in a WORD reference in retentive memory as inputs and outputs of Boolean expressions, function blocks, and calls that accept bit parameters.
• Battery-backed calendar clock.
• In-system upgradeable firmware.
• Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232 Ethernet station manager serial port.
• The embedded Ethernet interface provides:
  • Data exchange using Ethernet Global Data (EGD)
  • TCP/IP communication services using SRTP
  • Full PLC programming and configuration services
  • Comprehensive station management and diagnostic tools
  • Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network switch providing auto-negotiated network speed, duplex mode, and crossover detection.

Specifications

• Battery Memory retention: 5 years at 20°C (68°F), 40 days nominal without applied power.
• Program storage: Up to 10 Mbytes of battery-backed RAM, 10 Mbytes of non-volatile flash user memory.
• Current required from 5V bus: CPE010: 3.2 Amps nominal, CPE020: 4.5 Amps nominal.
• Operating Temperature: CPE010: 0 to 50°C (32°F to 122°F), 0 to 60°C (32°F to 140°F) with fan tray. CPE020: 0 to 60°C (32°F to 140°F) with fan tray required.
• Floating point: Yes
• Boolean execution speed, typical:
  • CPE010: 0.33ms per 1000 Boolean contacts/coils
  • CPE020: 0.14ms per 1000 Boolean contacts/coils
• Time of Day Clock accuracy: Maximum of 9 seconds per day
• Elapsed Time Clock (internal timing) accuracy: 0.01% maximum
• Embedded communications: RS-232, RS-485, Ethernet interface
• Ethernet Ports: Embedded auto-sensing 10/100 Mbps half/full duplex Ethernet interface
• Serial protocols supported: Modbus RTU Slave, SNP, Serial I/O
• VME Compatibility: System designed to support the VME64 standard ANSI/VITA 1
• Program blocks: Up to 512 program blocks. Maximum size for a block is 128KB.
• Memory: %I and %Q: 32Kbits for discrete, %AI and %AQ: configurable up to 32Kwords, %W: configurable up to the maximum available user RAM, Symbolic: configurable up to 10Mbytes.