GE ACC-5595 Reflective Memory Managed Hub

Network Hub Specifications

Features

• For use with 5565 Reflective Memory network of products
• Provides up to eight ports using small form factor pluggable (SFP) transceivers
• Hub assemblies can be cascaded with a maximum of 256 nodes
• Automatically bypasses defective or disconnected nodes in a fiber-optic network
• Automatic bypass can be optionally controlled by the loss of signal or by the loss of sync pattern
• Each port regenerates the serial optical signal, eliminating link losses and reducing jitter
• Configurable for use with cables up to 10 km in length
• 10BaseT Ethernet TCP/IP port for remote access and control
• RS232 port for local access and control
• Optional 19-inch 1U rack mount or desktop enclosure
• Internal universal power supply
• Dark on Dark option turns off board’s transmitter if the receiver does not detect a signal (available for firmware versions 02.00 & later)

Desktop Assembly Dimensions

• 16.73 inches wide by 10.0 inches deep by 1.72 inches high (1U). Dimensions do not include nonskid self-adhesive feet.

Rack Mount Assembly Dimensions

• The basic dimensions are the same as the desktop assembly, but include two 1U rack mount brackets for the standard 19-inch rack.

Rear Panel Connectors

• A power entry module that includes a power ON/OFF switch, a 4A/250V fuse, and a globally accepted IEC receptacle.
• Fuse: 1 A, 250 V, 5 x 20 mm, fast acting, IEC 60127-2 standard glass or equivalent

Front Panel Connectors

• 8 SFP transceivers. The SFP receptacles not populated with transceivers contain EMI dust plugs.
• One RJ45 Ethernet connector and one 9-pin female D-subminiature RS232 connector.

MTBF

• Total fit x qty: 2,317.3641
• MTBF (hours): 431,524.76

Cabling

• Each installed SFP transceiver requires either one Duplex LC-type fiber-optic cable or two Simplex LC-type fiber-optic cables.
• The Simplex cables are best suited for cascading hubs. The Duplex cables can be used for all other interconnectivity.

Power Requirements

• 90 to 264VAC
• 47 to 440Hz
• 25W. Power supply and power entry module meet safety standards: UL, C-UL: UL 1950 TUV: EN69050 CE: EN55022, EN61000-4-2, 3, 4, 5; EN61000-3-2

Environmental

• Operating Temperature: 0° to +65°C
• Storage Temperature: -40° to +85°C
• Operating Relative Humidity: 20% to 80%, noncondensing
• Storage Relative Humidity: 20% to 80%, noncondensing

Regulatory Compliance

• European Union (CE Mark)
• EN55024
• EN55022 Radiated Emissions Class A
• EN55022 Conducted Emissions Class A
• EN61000-4-2 (ESD)
• EN61000-4-3 (Radiated Immunity)
• EN61000-4-4 (EFT)
• EN61000-4-5 (Surge)
• EN61000-4-6 (Conducted RF)
• EN61000-4-8 (Power Frequency Magnetic Fields)
• United States FCC Part 15, Class A
• Canada ICES-003, Class A
• UL60950
• EN60950 (LVD)

Ordering Information

ACC-5595-2 - A B C

• A = Enclosure Options
• 0 = Reserved
• 1 = Reserved
• 2 = Rack Mount or Desktop
• B = Number of Single-Mode (10km) Pluggable Transceivers
• 0, 1, 2, 3, 4, 5, 6, 7, or 8
• C = Number of Multimode Pluggable Transceivers
• 0, 1, 2, 3, 4, 5, 6, 7, or 8

Simplex Cable Specifications: Fiber-optic cable - Multimode 62.5 micron core